TY - JOUR AU - Ni Ni Hlaing, AU - Htay Htay Win, AU - Myint Thein, AU - Aung Ko Latt, PY - 2019/12/29 Y2 - 2024/03/29 TI - Structural Analysis of Compressor Blades for Turbocharger by Using the Different Materials JF - International Journal of Advances in Scientific Research and Engineering (IJASRE), ISSN:2454-8006, DOI: 10.31695/IJASRE JA - IJASRE VL - 5 IS - 12 SE - Articles DO - 10.31695/IJASRE.2019.33643 UR - https://ijasre.net/index.php/ijasre/article/view/562 SP - 94-104 AB - <p>A structural analysis has been carried out to investigate the Von-Mises stresses, effective strains and total deformation of the<br>compressor blades of the turbocharger in locomotive diesel engines. An investigation in the usage of new materials is required. In<br>this research, compressor blades are designed with three different materials. The modeling of the compressor is drawn by using<br>SolidWorks (2016) software and analysis is done in ANSYS (17.0). The design speed of the compressor is considered 68,000 rpm.<br>An attempt is also made to suggest the suitable material for the compressor blades of a turbocharger by comparing the results<br>obtained for three different materials (Aluminum Alloy (7050-T7651), AISI 4340 Steel and Inconel Alloy (718)) for the compressor. The Aluminum Alloy (7050-T7651) for the compressor blades of a turbocharger is recommended on the suitable results than the other two materials</p> ER -