ROOF TRUSS DESIGN FOR INDUSTRIAL BUILDINGS

Authors

  • Chaw Wint Yee Zaw Department of Mechanical Engineering Technological University (Thanlyin) Myanmar
  • Khin Thu Zar Department of Mechanical Engineering Technological University (Thanlyin) Myanmar
  • KhinKhin Thant Department of Mechanical Engineering Technological University (Thanlyin) Myanmar

DOI:

https://doi.org/10.31695/IJASRE.2019.33425

Keywords:

Roof Truss Design, Structural Analysis, Method of Joints, Internal Forces, Materials, Truss

Abstract

The roof trusses are mostly depended on the internal forces in the structure, dismember the structure and analyze separate free-body diagrams of individual members or combination of members. In this paper, the design of roof trusses frame, rivet diameters, and area of all members have to be calculated. General design theory of structural analysis, the equilibrium of rigid body, method of joints, tension and compression of members, mechanical properties of materials, design of riveted joints and area of trusses members in the project of Thilawa Zone (1) constructed by PREFAB STEEL Company Limited. This paper deals with the design and analysis of roof truss.

Downloads

How to Cite

Zaw, C. W. Y., Zar, K. T. ., & Thant, K. . (2019). ROOF TRUSS DESIGN FOR INDUSTRIAL BUILDINGS. International Journal of Advances in Scientific Research and Engineering (IJASRE), ISSN:2454-8006, DOI: 10.31695/IJASRE, 5(7), 103–112. https://doi.org/10.31695/IJASRE.2019.33425

Issue

Vol. 5 No. 7 (2019): Volume 5 Issue 7 July (2019)

Section

Articles

License

Copyright (c) 2019 Chaw Wint Yee Zaw, Khin Thu Zar, KhinKhin Thant

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.